Tekna
Français 中文
Print this page print

GHF- High flow Gas Recycling

The gas recirculation unit reduces considerably the gas consumption of the installation. The gas coming out from the filtration unit is recompressed and can be re-used for the quench gas. The system is equipped with a pressure control valve which controls the outlet pressure constant.

Features:

  • Gas handling: Ar, Ar/H2, Ar/He, N2, O2
  • No corrosive gases or condensable vapours.
  • Dual Roots gas compressor
  • Monitoring and control of outlet pressure constant
  • H2 monitoring
     
Specifications
  GHF- 3500 GHF- 11000 GHF-17000
Inlet volume capacity *
actual m3/min (ACFM)		 3.5 (126) 11(400) 17 (600)
Typical outlet pressure *
for inlet 50 kPa (7 psia)
kPa (psia)		 136 (20) 177 (25.7) 195 (28.3)
Max outlet pressure
kPa (psia)		 200 (29) 200 (29) 200 (29)
Max power required
kW (HP)		 11 (15) 34 (45) 48 (65)
Electrical requirement 460 V
50/60Hz- 3ph		 460 V
50/60Hz-3ph		 460 V
50/60Hz-3ph
Cooling flow – 20 Celcius
lpm (USGPM)		 10 (2.6) 35 (9) 50 (10)
Dimensions (HXDXW)
Meters (inch)

 2,28m X 1,44m X 1,44m
(89 3/4" X 56 ½” X 56 ½”)

 2,34m X2.08m X 1,44m
(92" X 82” X 56 ½”)

 2,34m X2.08m X 1,44m
(92" X 82” X 56 ½”)
Weight
kg (lbs)		      

*The capacity of the recirculation unit depends greatly on the composition of the gas and the gas compressor
inlet pressure.